Cost-effective stress ECG system
CARDIPIA ECG interfaced with PC
Automatic ST measurement
Automatic ECG analysis
Automatic arrhythmia detection and alarm
Configuration of analysis parameters
Continuous ECG display
Copies and printed report of analysis result
Editing creation of treadmill protocol
Easy operation by Touch Screen (Type A)
SD card memory (Type A)
LAN/USB/RS232 connection (Type A)


Technical Specifications (CARDIPIA 400 Type 406RS/CARDIPIA 800 Type 812RS)

Recording system High resolution thermal array printer(8dots/mm)
Recording channel 6/3-ch(type 406RS)
12/6-ch(type 812RS)
Recording paper 110/63mm x 30m thermal sensitive roll paper (Type 406RS/ Type 406RSA)
216/210mm x 30m thermal sensitive roll paper (Type 812RS/ Type 812RSA)
Recording ECG Leads 12 standard leads: I, II, III, aVR, aVL, aVF, V1, V2, V3, V4, V5, V6
Sensitivity 5, 10, 20mm/mV
Recording speed 5, 10, 12.5, 25, 50mm/sec
Recording operation Automatic / Manual recording
ECG copy Reprint for the last patient
Full disclosure report Captured ECG trace for 1min while displaying ECG
Snap ECG record Latest signal save for 8sec while displaying ECG
ECG acquisition Simultaneous 12-lead ECG acquisition
Alphanumeric data input ID, age, patient name, hospital name and etc with alphanumeric key
Frequency response Filtered 0.5 ~ 30Hz / Unfiltered 0.05 ~150Hz
Digital filter Drift, muscle and AC(50/60 Hz)
1 mV calibration Internal 1 mV signal record for frequency and sensitivity response
A/D Conversion 12bits
Sampling rate 2ms
CMRR Greater than 100dB
Input Impedance Greater than 100Mohm
Performance Comply with AAMI requirements
Safety Class I(Degree of protection against electric shock: Type CF applied parts)
Defibrillator protection 5000VDC
Patient Leakage Current Less than 10
A/C power Free voltage AC 100~240V10 %, 50/60Hz
D/C power Built-in rechargeable battery (+24V, 600mA, NiCd)
Digital Interface(Option) RS232 to connect external apparatus
Heart rate(Option) 30~200bpm
PC network(Option) ECG data transmission to PC, ECG save on PC, ECG record to PC printer
Real time clock(Option) Date, time(Option)
Arrhythmia detection(Option) Automatic record mode
Pace maker detection(Option) Pace maker detection
Memory Built in Memory(Option, Type 406RS/ Type 406RSA)
USB/SD card(Type 812RS/ Type 812RSA)
LCD(Standard, 2.5"LCD B/W) Graphic LCD(64 x 128dots), Viewing area: 60 x 32.5mm( Type 406RS/ Type 812RSA)
LCD(Standard, 3.5"LCD color) 320x240 dots, Viewing area : 70.08x52.56mm(Type 406RSA/ Type 812RSA)
LCD(Option, 4"LCD B/W) Graphic LCD(240 x 320dots), Viewing area: 57 x 75mm(Type 406RS / Type 812RS)
LCD(Option, 5.7"LCD B/W) Graphic LCD(240 x 320dots), Viewing area: 90 x 120mm(Type 406RS / Type 812RS)
LCD(Option, 7"LCD color) 800x400 dots, Viewing area : 152.40x91.44(Type 406RSA/ Type 812RSA)
Touch screen 3.5¡±color LCD, 7¡±color LCD(Type 406RSA/ Type 812RSA)
Auto power off After 5 minutes of complete inactivity
Dimension 333 x 310 x 87mm(812RS), 313 x 252 x 85mm(406RS),
Weight 3kg including rechargeable battery
Temperature Operating: 10 ~ 40, Storage: -40 ~ 70
Relative humidity Operating: 30 ~ 75%, Storage: 10 ~ 80%
Atmosphere pressure 700 ~ 1060hPa

Technical Specification(Stress ECG S/W)

Lead System 12 standard leads
Recorded signal frequency range 0.05 ~ 75Hz
ECG amplifier Input from 406RS and 812RS
A/D converter 12bit
Paper speed 25mm/sec
Protocol RS232 for Nurytec Treadmill (VR3000TSM)
Computer control treadmill speed and incline
PC Pentium ¡« at 450 MHz processor.
64MB of RAM memory.
Hard disk with at least 2GB of free space.
SVGA display
2 serial port RS232 compatible

Technical Specification(VR3000TSM Treadmill)

Length and width 270(L) x 800(W) x 1340(H) (mm)
Weight 205 Kg
Incline range 0% to 25% in 1% increment
Speed range 0.5 Km/h to 20 Km/h
Running range 1350(L) x 500(W) (mm)

* contents and specification subjects change without notice