| Anti-electroshock type |
Class I equipment and Internal powered equipment. |
| Size Monitor |
318 X 152 X 264 mm |
| Weight Monitor |
5.5kg |
| Enviroment |
Temperature
Working
Transport and Storage |
0 ~ 40
-20 ~ 60 |
Humidity
Working
Transport and Storage |
30 % ~ 85 %
30 % ~ 93 % (no coagulate) |
Altitude
Working
Transport and Storage |
-500 to 4,600 m
-500 to 13,100 m |
| Power Supply |
100/250 VAC, 50/60 Hz, Pmax=80 VA |
| Display |
| Device |
12.1 in Color TFT. 3 LED |
| Messages |
8 Waveforms Maximum
1 Alarm LED (Yellow/Red)
1 Power LED (Green)
1 Battery Charge LED (Green)
3 Sound Mode corresponding Alarm Mode |
| Signal Interface |
| External Display |
Standard VGA |
ECG Output
Amplitude
Accuracy
Impedance
Signal Delay |
BNC
1V/mV
<5 %
50
<20 mS |
| Battery |
Rechargeable 2.3 A/Hr 12V Lead-Acid battery |
| Recorder (Option) |
48 mm |
| Recall |
Trend Recall
Short
Long |
1 hrs, 1 Second Resolution.
72 hrs. 1 Min. Resolution. |
| Alarm Event Recall |
60 alarm events of all parameters and 8/16/32 seconds of corresponding waveform |
| NIBP Measurement Recall |
400 NIBP measurement data |
| ECG |
| Lead Mode |
5 Leads(R, L, F, N, C) type(7012S/7010S) |
| Lead selection |
I, II, III, avR, avL, avF, V |
| Waveform |
2 ch |
| Gain |
x2.5mm/mV, x5.mm/mV, x10mm/mV, x20mm/mV auto |
HR and Alarm Range
Adult
Neo/Ped |
15 ~ 300 bpm
15 ~ 350 bpm |
| Differential Input Impedance |
>5M |
| CMRR |
Monitor >105dB
Operation >10dB
Diagnosis > 8dB |
| Electrode offset potential |
 300mV |
| Leakage Current |
<10 uA |
| Baseline Recovery |
<3s After Defi. |
| ECG Signal Range |
8mV(Vp-p) |
| Bandwidth |
Surgery 1~15 Hz
Monitor 0.5~35 Hz
Diagnostic 0.05~100 Hz |
| ST Segment Monitoring |
Measure and Alarm -2.0 ~ + 2.0mV |
| Calibration Signal |
1mV(Vp-p), 5% Accuracy |
ARR Detecting
Type
Alarm
Review |
ASYSOLE, VFIBNTAC, COUPLET, BIGMINY, TRIGEMINY, R ON T, VT>2, PVC, TACHY, BRADY, MISSED BEATS, PNP, PNC
Available
Available |
| RESPARATION |
| Method |
In |
Differential Input
Msauring and Alarm Range
Adult
Neo/Ped
Resolution
Accuracy |
0.3 ~ 2.5 Hz
0 ~ 120 rpm
0 ~ 150 rpm
1 rpm
2 rpm |
| Apnea Alarm |
10~40 S |
| NIBP |
| Method |
Oscillometric |
| Mode |
Manual, Auto, STAT |
| Measuring Interval in AUTO Mode |
1,2,3,4,5,10,15,30,60,90,120,180,240,480 Min. |
| Measuring Period in STAT Mode |
5 Min. |
| Pules Rate Range |
40~240 bpm |
| Alarm Type |
SYS, DIA, MEAN |
Measuring and alarm Range
Adult Mode
Pediatric Mode
Neonatal Mode |
10 ~ 270 mmHg
10 ~ 200 mmHg
10 ~ 135 mmHg |
Resolution
Pressure |
1 mmHg |
Accuracy Pressure
Maximum Mean error
Maximum Standard deviation |
5mmHg
8mmHg |
| SpO2 |
| Measuring Range |
0 ~ 100% |
| Alarm Range |
0 ~ 100% |
| Resolution |
1% |
| Accuracy |
70% ~ 100% 2%
0% ~ 69% unspecified |
| Actualization interval |
about 1 Sec. |
| Alarm Delay |
10 Sec. |
Pulse Rate
Measuring and Alarm Range
Resolution
Accuracy
Alarm Delay |
0 ~ 254 bpm
1 bpm
2 bpm
10 Sec. |
| MASIMO Specification: |
|
Range
Saturation(%SpO2)
Pulse Rate(bmp) |
1% ~ 100%
25 ~ 240 |
Accuracy
Saturation(%SpO2)
Adults
Neonates |
- During No Motion Conditions
70% ~100% 2digits
0% ~ 69% unspecified
70% ~ 100%2digits |
Saturation(%SpO©ü)
Adults
Neonates |
-During Motion Conditions
70% ~ 100% 3digits
0% ~ 69% unspecified
70% ~ 100%3digits |
| Pulse(bpm) |
-During No Motion Condition
25 to 240 3digits |
| Pulse(bpm) |
-During Motion Condition
25 to 240 5digits |
Resolution
Saturation(%SpO2) |
1% |
| Pluse Rate(bpm) |
1 Temperature |
| Channels |
2(7012S, 7010S), 1(7010E) |
| Measuring and Alarm Range |
0 ~ 50 |
| Resolution |
0.1 |
| Accuracy |
0.1 |
| Actualization interval |
about 1 Sec. |
| Average Time Constant |
<10 Sec. |
| IBP |
| Channel |
2 |
| Label |
ART, PA, CVP, RAP, LAP, ICP, P1, P2 |
Measuring and alarm range
ART
PA
CVP/RAP/LAP/ICP
P1/P2 |
0 ~300mmHg
-6 ~ 120mmHg
-10 ~ 40mmHg
-10 ~ 300mmHg |
Press Sensor
Sensitivity
Impedance
Resolution
Accuracy
Actualization interval |
5 uV/V/mmHg
300 ~ 3000
1mmHg
2% or 1mmHg which great
about 1 Sec. |
| CO |
| Method |
Thermodilution Technique |
Measuring range
CO
TB
TI |
0.1 ~ 20 L/min
23 ~ 43
0 ~ 27 |
Resolution CO
TB, TI |
0.1 L/min
0.1 |
Accuracy CO
TB
TI |
5% or 0.1L/min, which great
0.1
0.1 |
| Calculation |
CO, Hemodynamic Calculation |
| Alarm Range |
23-43 |
| CO2 |
| Method |
Infra-red Absorption Technique |
| Measuring Mode |
Sidestream or Mainstream (option) |
| Side-stream mode sampling gas flow rate |
100, 150, 200 m/Min (option) |
Measuring range
CO2
INSCO2
AwRR |
0 ~ 99 mmHg
0 ~ 99 mmHg
0 ~ 150 rpm |
Resolution
CO2
INSCO2
AwRR |
1 mmHg
1 mmHg
1 rpm |
Accuracy
CO2
AwRR |
2mmHg, 0 ~ 40 mmHg
5% of reading, 41 ~ 76 mmHg
10% of reading, 77 ~ 99 mmHg
2 rpm |
| Actualization interval |
about 1 Sec. |
| Start-up Time |
<30 sec typical in sidestream mode
<80 seconds in mainstream mode from 25¡É ambient, 5W supplied to sensor heater(Mainstream sensor temperature controlled to 42¢ªC) |
| Mainstream Response Time |
100 msec (10% to 90%) |
| Sidestream Rise Time |
240 msec (10% to 90%) |
| Sidestream Delay Time |
1.12 seconds maximum with 7 length 0.055 ID. Sampling line at 175m/min |
Alarm range
CO2
InsCO2
AwRR |
0 ~ 99 mmHg
0 ~ 99 mmHg
0 ~ 150 rpm |
| Suffocation Alarm Delay AwRR |
10 ~ 40 Sec. |
